The SV-MAG-236 Remote Magnetometer was developed for situations where the SV-ADAHRS-200/201’s integrated magnetometer cannot be located in an area free of magnetic disturbances while satisfying the other installation constraints (such as proximity to center of gravity) of the SV-ADAHRS-200/201. The SV-MAG-236 is particularly recommended for steel-frame aircraft.
To minimize the possibility of magnetic interference from the connector assembly, the SV-MAG-236 uses an 18-inch integral cable – the connector is remoted from the magnetometer sensor. A maximum of one SV-MAG-236 can be used in a SkyView system.
Design Considerations: A SkyView Network Cable is used to connect a Remote Magnetometer Module to a Display. One Remote Magnetometer Module will provide data to as many Displays as are connected in the SkyView System. However, when you install a secondary ADAHRS (SV-ADAHRS-201) only one Remote Magnetometer needs be installed.
Connections:
1 – 9-Pin DIN Connector for the SkyView Network
2 – 2-Pin Connector for SV-OAT-340 Sensor
Installation Location – Compass: The ADAHRS Modules include a Magnetometer (Remote Compass). This means that it needs to be located in magnetically benign location, away from high current wires and moving aircraft components that contain a ferrous material.
SV-MAG-236 Remote Magnetometer
$287.10 inc. GST
In stock
Description
SV-MAG-236 Remote Magnetometer for SkyView
The SV-MAG-236 Remote Magnetometer was developed for situations where the SV-ADAHRS-200/201’s integrated magnetometer cannot be located in an area free of magnetic disturbances while satisfying the other installation constraints (such as proximity to center of gravity) of the SV-ADAHRS-200/201. The SV-MAG-236 is particularly recommended for steel-frame aircraft.
To minimize the possibility of magnetic interference from the connector assembly, the SV-MAG-236 uses an 18-inch integral cable – the connector is remoted from the magnetometer sensor. A maximum of one SV-MAG-236 can be used in a SkyView system.
Design Considerations: A SkyView Network Cable is used to connect a Remote Magnetometer Module to a Display. One Remote Magnetometer Module will provide data to as many Displays as are connected in the SkyView System. However, when you install a secondary ADAHRS (SV-ADAHRS-201) only one Remote Magnetometer needs be installed.
Connections:
1 – 9-Pin DIN Connector for the SkyView Network
2 – 2-Pin Connector for SV-OAT-340 Sensor
Installation Location – Compass: The ADAHRS Modules include a Magnetometer (Remote Compass). This means that it needs to be located in magnetically benign location, away from high current wires and moving aircraft components that contain a ferrous material.
Related products
Garmin Aera 760 Portable Aviation GPS
$2,450.00 inc. GSTGarmin G5 Backup Battery (010-12493-02)
$480.04 inc. GSTGarmin GI 275 Electronic Flight Instrument GI275 (Base)
$5,500.00 inc. GSTGNS WAAS Data Card
$398.20 inc. GST